Ниже линк на драйвер D-Link 528T для VMWare ESXi 5/5.1

dlink-528t-1.x86_64_vib.zip

Procedure:

  1. Upload the file (I placed it in root once uploaded) to your server and extract “unzip DLink-528T-1.x86_64.vib.zip” – NOTE: You can use unzip on ESXi5+.
  2. Change your support level:
    esxcli software acceptance set –level=CommunitySupported
    Host acceptance level changed to ‘CommunitySupported’

  3. Install the driver with: “esxcli software vib install -v /DLink-528T-1.x86_64.vib“
    1. You will then get the following screen:

      Installation Result
      Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.
      Reboot Required: true
      VIBs Installed: DLink_bootbank_DLink-528T_1
      VIBs Removed:
      VIBs Skipped:

  4. Reboot once completed.

That’s it.

ps – You can check your configuration by doing the following on your console ( NOTE: I have 2 onboard and 2 PCI adapters):

lspci | grep Net
00:06:00.0 Network controller: Intel Corporation 82574L Gigabit Network Connection [vmnic0]
00:07:00.0 Network controller: Intel Corporation 82574L Gigabit Network Connection [vmnic1]
00:08:03.0 Network controller: D-Link System Inc DGE-528T Gigabit Ethernet Adapter [vmnic2]
00:08:04.0 Network controller: D-Link System Inc DGE-528T Gigabit Ethernet Adapter [vmnic3]
network/dlink_528.txt · Last modified: 2014/08/30 13:22 by rybario
About this template
CC Attribution-Share Alike 4.0 International
Powered by PHP Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0 Valid HTML5